HOW IT'S MADE ACOUSTIC GUITARS

HOW IT'S MADE

ACOUSTIC GUITARS

First they took a piece of wood, that wood is very light and it vibrate very well. this piece of wood goes to a thirty time press that works like a cockie cutter. later they made the hole of the guitar with auger blades along the sides, the size of the hole affects how the guitar will sound, then the girl ond a wood inlaid decoration Hola rosa.

Next they made the size of the qatar the first timers wood pieces in boiling water about 15 seconds, then place them in a heated pressed to make the curved, the press aplies heat in all the wood for a minute, then they conect the two sides with blocks avoid me to be there mahogany or poplar. one is glued and clamped at the bottom, the other at the top. then they go on a clamp on one line in wich will connect the sides to the top and back, those little cuts give it flexibility around the curves.

Then with a hand router they carefully notched aligning to receive four witch braces to support the back of the guitar. Later strategically placed braces help the top of the qatar withstand the tension of the strings they also equalize sound frequencies by controlling the vibrations.After baccum press makes the bracing appear evenly, decal on the top and the bottom. 

The body of the guitar is now sample it goes in to a press than a drying rack for several hours, next they put a plastics to protect the edges of the guitar.
then comes a fine sanding, next a machine with special sensor measures the precise angle next the body and neck of the guitar will later be atached. the angle is critical for sound quality kid rules the hole an sans the pieces accordingly. nex they aply lacquer. 48 codes depending on the finish the fingerboard is made of rosewood or ebony the metal frat separate the half tones on a musical scale. Next and ajustable roes goes inside the neck this lets the neck to adap to the diferent tensions. later the neck goes to a press to put togueter all the parts. next they instale the machine on the head of the guitar.

next the neck and the body get togueter with glue. next they glue on the bridge and later they clamp it because the glue is temporaly. nex they glue on the headstock and put a hard piece of plastic is the strigns evenly, next come the saddle and they put the strings on the bridge and finally they string the guitar. 

1.braces: Apoyos
2.attached: Adjunta
3.clamp: Abrazadera, tornillo
4.saddle: Silla
5.router: Enrutador
6.vaccum: Vacio
7.edges: Bordes
8.avoid: Evitar
9.headstock: Clavijero
10.poplar: Álamo